PARA OLTS 300xx e 400xx
Acessando a OLT por telnet ou SSH Verificar a versão do firmware já presente na flash na OLT, com o comando show flash images:
OLT-PARKS-03-ITRIO# show flash images <<--- TECLE ENTER
Codes: > - image file selected to startup
-#- --version-- --length-- -----date/time------ path
1 1.0.0BT0 28284976 2018-05-23 20:24:46 factoryImage.vol
2 2.2.0 28780616 2019-03-07 16:06:16 Fiberlink_30028-2.2.0.vol
3 3.0.0 28780604 2019-04-16 15:41:08 Fiberlink_30028-3.0.0.vol
4 1.3.0 28685704 2018-11-27 14:37:11 Fiberlink_30028-1.3.0.vol
> 5 6.1.0PR5 29029200 2021-09-21 21:15:30 Fiberlink_30028-6.1.0PR5.vol
6 1.0.0 28288388 2018-07-18 15:31:15 Fiberlink_30028-1.0.0.vol
7 5.0.0 29131608 2019-12-11 16:04:46 Fiberlink_30028-5.0.0.vol
8 5.0.2 29135704 2020-01-31 15:15:37 Fiberlink_30028-5.0.2.vol
9 5.0.3 29135704 2020-03-20 16:00:05 Fiberlink_30028-5.0.3.vol
10 6.0.6PR0 29205332 2021-02-15 15:34:38 Fiberlink_30028-6.0.6PR0.vol
11 1.2.0 28677508 2018-10-18 15:34:37 Fiberlink_30028-1.2.0.vol
12 6.0.1 29143892 2020-06-19 21:01:30 Fiberlink_30028-6.0.1.vol
13 6.0.6 29205332 2021-04-23 20:58:45 Fiberlink_30028-6.0.6.vol
14 4.1.0 29037392 2019-08-30 15:39:51 Fiberlink_30028-4.1.0.vol
677974528 bytes available (371216896 bytes used)
OLT-PARKS-03-ITRIO#
Selecionar e copiar o nome da versão na coluna PATH: exemplo Fiberlink_30028-6.0.6.vol
executar o comando: select flash image {nomedaversão}
OLT-PARKS-03-ITRIO# select flash image Fiberlink_30028-6.0.6.vol <<--- TECLE ENTER E DEPOIS TECLE Y
Após isso, reinicie a OLT:
OLT-PARKS-03-ITRIO# reload <<--- TECLE ENTER e depois tecle Y
PARA OLTS 200xx
Acessando a OLT por telnet ou SSH Verificar os firmware que estão no banco de firmware com o comando
show firmware dual-firmware-versions
OLT-PARKS-01-BROMO# show firmware dual-firmware-versions
FlashBank1 System Version: 3.9.4PR6
FlashBank2 System Version: 3.9.4PR8
Com o comando show firmware boot-flash-bank , você verifica o banco que está em uso atualmente. No exemplo o banco 2 está em uso.
OLT-PARKS-01-BROMO# show firmware boot-flash-bank
Boot-Flash-Bank: bank2
Acesse o modo de configuração e selecione o banco de firmware que você quer subir, usando o comando
firmware select boot-flash-bank bank1
OLT-PARKS-01-BROMO# conf t
OLT-PARKS-01-BROMO(config)# firmware select boot-flash-bank bank1
Após isso reinicie a OLT:
PARKS(config)# end
PARKS# reload
Save the current configuration? [(y)es/(n)o/(C)ancel] YES <<<<---- TECLE A TECLA Y