Configuração na OLT ZTE para resolver o problema de criar duas WANs remotas
Configuração OLT ZTE:
gpon
onu profile vlan managment-v1502 tag-mode tag cvlan 1502 onu profile vlan pppoe-v1002 tag-mode tag cvlan 1002 !
pon
onu-profile gpon line 410L
tcont 1 profile UP-125M
tcont 2 profile UP-100M
gemport 1 name managment unicast tcont 1 dir both
gemport 2 name pppoe unicast tcont 2 dir both !
pon
onu-profile gpon remote 410R
service managment gemport 1 vlan 1502
service pppoe gemport 2 vlan 1002
wan 1 service internet host 1
wan 2 service internet host 2
!
interface gpon-olt_1/1/1
onu 4 type ZTEG-F660 sn PRKS00c52418
onu 4 profile line 410L remote 410R
interface gpon-onu_1/1/1:4
switchport mode hybrid vport 1
switchport mode hybrid vport 2
service-port 1 vport 1 user-vlan 1502 vlan 1502
service-port 2 vport 2 user-vlan 1002 vlan 1002 !
pon-onu-mng gpon-onu_1/1/1:4
mgmt-ip 10.93.127.250 255.255.0.0 vlan 1502 priority 0 route 0.0.0.0 0.0.0.0 10.93.0.1 host 1
wan-ip 2 mode pppoe username parks password parks vlan-profile pppoe-v1002 host 2 !
Segue em anexo as telas da ONU 410 com a configuração recebida, na tela do PPPoE pode ser visto que o NAT está habilitado.
A versão de Software utilizada para o teste foi V1.0.7PR8
