Módulos homologados para OLTs modelo 300xx e 400xx:
Fabricante | PART-NUMBER (PN) | Calibração Recomendada (SFP TYPE) |
Hisense | Classe C+ LTE3680P-BC / LTE3680P-BC+ / LTE3680P-BH+/ LTE3680P-BC+1 / LTE3680P-BC+1DM / Classe C++ LTE3680P-BC+2 / LTE3680P-BC+2DM | any-reset-preamble |
Taclink | Classe C+ WXTRGP22SS24 | any-reset-preamble |
Sourcephotonics | Classe C+ SPS-43-48-HCP-CDF-SD | any-reset-preamble |
Superxon | Classe C+ SOGQ4321-PSGB Classe C++ SOGQ4321-PSGC | any-reset-preamble |
Módulos homologados para OLTs modelo 1000x e 200xx:
Fabricante | PART-NUMBER (PN) | Calibração Recomendada (SFP TYPE) |
Sourcephotonics | Classe B+ SPS-43-48H-HP-CDE-SD | sourcephotonics_b ou neophotonics_a |
Neophotonics | Classe B+ 38J0-6538E-ST+ | neophotonics_b |
Hisense | Classe C+ LTE3680-BC+ | hisense_ligent_c |
Configuração da Calibração em OLT 300xx e 400xx:
AO ALTERAR A CONFIGURAÇÃO DE CALIBRAÇÃO OCORRERÁ UMA QUEDA NO LINK DAS ONUS DA PORTA GPON. APÓS ALTERAR, AGUARDE ATÉ TODAS AS ONUS TERMINAREM DE ATIVAR.
- Primeiramente acessar a OLT via telnet ou SSH:
Acesso padrão:
user: admin
senha: parks
- Faça os comandos abaixo para verificar qual a calibração atual e qual tipo de SFP está inserido na porta:
Comandos:
show interface gponx/x -<<<< Para verificar a calibração atual
e
show interface gponx/x sfp <<<< Para verificar informações do SFP conectado
Exemplo abaixo na porta gpon1/1:
PARKS# show interface gpon1/1
Interface gpon1/1 is up, line protocol is down
index 4 mtu 12000
HWaddr: 00:04:16:08:97:b8
aging-time: 300s
learning-mode move
autonegotiation disabled speed-2.5G full-duplex
Transceiver type superxon(manually set) <-- CALIBRAÇÃO ATUAL CONFIGURADA
input rate 0 Kbps, 0 pps, rxload 0%
input packets 0, bytes 0, dropped 0
input errors 0, frame 0
output rate 0 Kbps, 0 pps, txload 0%
output packets 0, bytes 0
output errors 0, collisions 0
PARKS# show interface gpon1/1 sfp
Transceiver in interface gpon1/1.
----------------------------------------------
Transceiver
Connector: SC
Laser Wavelength: 1490 nm
Encoding Mechanism: NRZ
Nominal Bit Rate: 2500 Mbps
Vendor
Name: HISENSE
PN: LTE3680P-BC+1 <-- FABRICANTE E PART-NUMBER DO SFP CONECTADO
Rev: 10
SN: 33561183400324
Data Code(YMDL): 180827
Link Length Supported
9/125 um fiber: 20000 m
Diagnostics (Internally Calibrated)
Temperature: 26.90 C
Supply Voltage: 3.24 V
TX Output Power: 5.43 dBm
RX Input Power: No Signal
SE VERIFICARMOS NA TABELA NO INICIO DO ARTIGO, A CALIBRAÇÃO CORRETA PARA QUALQUER SFP NAS OLTS 300XX E 400XX, É A CALIBRAÇÃO ANY-RESET-PREAMBLE
- Para modificar a configuração, fazer os comandos abaixo:
configure terminal
interface gponx/x
sfp type any-reset-preamble
end
exit
copy running startup
Após alterar, verifique novamente a calibração na porta para confirmar que foi trocado corretamente.
PARKS# show interface gpon1/1
Interface gpon1/1 is up, line protocol is down
index 4 mtu 12000
HWaddr: 00:04:16:08:97:b8
aging-time: 300s
learning-mode move
autonegotiation disabled speed-2.5G full-duplex
Transceiver type any-reset-preamble (manually set)
input rate 0 Kbps, 0 pps, rxload 0%
input packets 0, bytes 0, dropped 0
input errors 0, frame 0
output rate 0 Kbps, 0 pps, txload 0%
output packets 0, bytes 0
output errors 0, collisions 0
Configuração da Calibração em OLT 100xx e 200xx:
AO ALTERAR A CONFIGURAÇÃO DE CALIBRAÇÃO OCORRERÁ UMA QUEDA NO LINK DAS ONUS DA PORTA GPON. APÓS ALTERAR, AGUARDE ATÉ TODAS AS ONUS TERMINAREM DE ATIVAR.
- Primeiramente acessar a OLT via telnet ou SSH:
Acesso padrão:
user: admin
senha: parks
- Faça os comandos abaixo para verificar qual a calibração atual e qual tipo de SFP está inserido na porta:
Comandos:
show interface gponx/x -<<<< Para verificar a calibração atual
e
show interface gponx/x sfp <<<< Para verificar informações do SFP conectado
Exemplo abaixo na porta gpon1/1:
PARKS# show interface gpon1/1
Interface gpon1/1 is up, line protocol is down
index 4 mtu 12000
HWaddr: 00:04:16:08:97:b8
aging-time: 300s
learning-mode move
autonegotiation disabled speed-2.5G full-duplex
Transceiver type neophotonics_b(manually set) <-- CALIBRAÇÃO ATUAL CONFIGURADA
input rate 0 Kbps, 0 pps, rxload 0%
input packets 0, bytes 0, dropped 0
input errors 0, frame 0
output rate 0 Kbps, 0 pps, txload 0%
output packets 0, bytes 0
output errors 0, collisions 0
PARKS# show interface gpon1/1 sfp
Transceiver in interface gpon1/1.
----------------------------------------------
Transceiver
Connector: SC
Laser Wavelength: 1490 nm
Encoding Mechanism: NRZ
Nominal Bit Rate: 2500 Mbps
Vendor
Name: HISENSE
PN: LTE3680P-BC+ <-- FABRICANTE E PART-NUMBER DO SFP CONECTADO
Rev: 10
SN: 33561183400324
Data Code(YMDL): 180827
Link Length Supported
9/125 um fiber: 20000 m
Diagnostics (Internally Calibrated)
Temperature: 26.90 C
Supply Voltage: 3.24 V
TX Output Power: 5.43 dBm
RX Input Power: No Signal
SE VERIFICARMOS NA TABELA NO INICIO DO ARTIGO, A CALIBRAÇÃO RECOMENDADA PARA O SFP HISENSE LTE3680P-BC+, É A CALIBRAÇÃO HISENSE_LIGENT_C
- Para modificar a configuração, fazer os comandos abaixo:
configure terminal
interface gponx/x
sfp type hisense_ligent_c
end
exit
copy running startup
Após alterar, verifique novamente a calibração na porta para confirmar que foi trocado corretamente.
PARKS# show interface gpon1/1
Interface gpon1/1 is up, line protocol is down
index 4 mtu 12000
HWaddr: 00:04:16:08:97:b8
aging-time: 300s
learning-mode move
autonegotiation disabled speed-2.5G full-duplex
Transceiver type hisense_ligent_c (manually set)
input rate 0 Kbps, 0 pps, rxload 0%
input packets 0, bytes 0, dropped 0
input errors 0, frame 0
output rate 0 Kbps, 0 pps, txload 0%
output packets 0, bytes 0
output errors 0, collisions 0